Windows 10 Update Error 0x800703f1 [FIX]

Microsoft has released an update for Windows 10 that is causing some systems to freeze. We have a fix here, but you will need to make sure your system meets the requirements of this workaround before performing it.

The “windows update error 0x800703f1 windows 10” is a problem that has been present for a while. Microsoft released the fix on their website.

Windows 10 Update Error 0x800703f1 [FIX]


Ivan Jenic’s contribution

Expert in Troubleshooting

Ivan has dived deep into knowing this operating system, with a specialize in drivers and driver problems, thanks to his passion for all things Windows and his natural curiosity. When he isn’t tackling, he is… Continue reading

29th of December, 2021

Originally published in June 2018



We propose Restoro PC Repair Tool to address a variety of PC issues: This program will fix common computer faults, protect you against file loss, viruses, and hardware failure, and optimize your PC to run at its best. In three simple actions, you can immediately fix PC problems and eradicate viruses:

  1. Download the Restoro PC Repair Tool, which includes patent-pending technologies (patent available here).
  2. To detect Windows faults that may be causing PC difficulties, click Start Scan.
  3. To correct problems that are hurting your computer’s security and performance, click Repair All.
  • This month, 0 readers have downloaded Restoro.

Despite the fact that Windows 10 is on its way to become the most widely used operating system in the world, Microsoft continues to receive customer complaints, the most of which are connected to the Update function and privacy.

There are over 30 separate update flaws that need to be fixed, according to the users. One of these, with the number 0x800703f1, affects USB ports and peripheral devices.

It’s linked to a problem with service registration, which causes updates to get stuck. Until Microsoft resolves this problem, we have some helpful tips and solutions for you.

How to Fix Error 0x800703f1 in Windows 10 Update

The error 0x800703f1 in Windows Update might emerge and prevent you from installing some updates. Users have reported the following difficulties in relation to this error:

  • System Restore error 0x800703f1 – If this issue occurs when using System Restore, search your system for file corruption and see if it solves the problem. You may also try deactivating your antivirus to see if it helps.
  • 0x800703f1 Windows 8 is a new operating system from Microsoft. This problem, according to users, may also impact previous versions of Windows. Even if you’re on Windows 8 or 7, you should know that most of our solutions will work for you, so give them a go.

Solution 1: Roll back any drivers that aren’t working properly.

The problem revolves on drivers. Before the update, most of the drivers worked well, but Windows 10 somehow ruined them.

As a result, your initial action should be to attempt to restore drivers to their prior condition. Follow the steps below:

  1. Open Device Manager by right-clicking Start. Windows-10-Update-Error-0x800703f1-FIX
  2. On the list, look for any faulty devices or peripherals.
  3. Right-click and choose Properties from the drop-down menu.
  4. Go to the Driver tab.
  5. Roll back the driver by clicking on it.

If nothing has changed as a result of this, go to the next step.

Solution 2: Make use of the SFC and DISM utilities.

If you continually encountering the error 0x800703f1, it’s possible that the problem is due to file corruption. This may happen for a variety of reasons, resulting in a corrupted Windows installation.

However, you may easily resolve the corruption issues by performing an SFC scan. Follow these steps to do so:

  1. To access the Win + X menu, press Windows Key + X. Select Command Prompt (Admin) from the drop-down menu. If Command Prompt isn’t accessible, PowerShell may be used instead (Admin). 1640797006_861_Windows-10-Update-Error-0x800703f1-FIX
  2. Enter sfc /scannow and hit Enter when Command Prompt appears. 1640797008_362_Windows-10-Update-Error-0x800703f1-FIX
  3. SFC will now begin scanning your system in an attempt to restore it. Do not interrupt this scan, since it may take up to 15 minutes.

Once the scan is complete, check to see whether the issue has been addressed. If SFC scan did not resolve the issue, or if you were unable to run SFC scan at all, you could try DISM instead.

Follow these procedures to utilize DISM to fix your computer:

  1. Run Command Prompt by pressing Windows key + X. (Admin).
  2. On the command line, copy and paste the following command:
    • DISM.exe /Online /Cleanup-image /Restorehealth DISM.exe /Online /Cleanup-image /Restorehealth 1640797008_934_Windows-10-Update-Error-0x800703f1-FIX
  3. If the DISM is unable to acquire files from the internet, try using your installation USB or DVD. Insert the appropriate media and enter the following command:
    • DISM.exe /Online /Cleanup-Image /RestoreHealth /Source:C:RepairSourceWindows /LimitAccess DISM.exe /Online /Cleanup-Image /RestoreHealth /Source:C:RepairSourceWindows
  4. Replace “C:RepairSourceWindows” with the location of your DVD or USB.

Check whether the issue still exists after running the DISM scan. If the problem persists, or whether you were unable to execute DISM scan before, run it again to see if it resolves the problem.

Solution 3: Disable Nvidia drivers and GeForce Experience.

Your drivers are often the source of error 0x800703f1 and prohibit you from upgrading your PC. Users claim that Nvidia drivers are to blame for the problem.

If this is the case, you must uninstall both the nVidia drivers and the nVidia GeForce Experience software from your computer.

Uninstalling Nvidia drivers and software may be done in a number of ways, but the ideal method is to utilize uninstaller software. Uninstaller software, if you are unfamiliar with it, may remove any program from your computer.

The uninstaller program will not only delete the application, but it will also remove any related files and registry entries, making it seem as if the software was never installed.

We suggest obtaining a driver removal program or a full-featured uninstaller with an integrated driver removal capability if you want a good and safe application.

Reinstall Nvidia drivers after removing the drivers and software, and see whether it fixes the problem.

Solution 4: Make sure your antivirus software is up to date.

According to users, your antivirus software might occasionally interfere with your system and create error 0x800703f1 when you attempt to update it.

Expert Tip: Some PC problems, such as damaged repositories or missing Windows files, are difficult to resolve. If you’re having problems repairing a mistake, it’s possible that your system is partly broken. Restoro is a tool that will scan your computer and determine the source of the problem. To download and begin mending, go here.

If that’s the case, we recommend turning off certain antivirus functions and seeing if it helps. If the problem persists, you should deactivate your antivirus entirely and see if it helps.

If the issue persists even while your antivirus is deactivated, you might try uninstalling it. After you’ve removed it, attempt to update again.

If deleting the antivirus resolves the problem, it may be time to switch to a new antivirus.

There is a lot of outstanding antivirus software for Windows 10 that has been verified to have a low error rate and doesn’t interfere with other programs or system operations.

Solution #5: Turn off Windows Defender.

If you don’t have a third-party antivirus installed, Windows Defender is most likely operating in the background.

This is a good antivirus program that, in most circumstances, won’t cause any problems with your computer.

However, a few customers have claimed that Windows Defender might occasionally cause this problem. It is recommended that you deactivate real-time protection in Windows Defender to resolve the issue.

This is really straightforward, and you may do it by following these steps:

  1. To access the Settings app, press Windows Key + I. Go to the section Update & Security. 1640797009_883_Windows-10-Update-Error-0x800703f1-FIX
  2. In the left pane, choose Windows Security. Click Open Windows Defender Security Center in the right pane. 1640797009_820_Windows-10-Update-Error-0x800703f1-FIX
  3. Choose between virus and threat prevention. 1640797010_646_Windows-10-Update-Error-0x800703f1-FIX
  4. Select Virus & Threat Protection Settings from the drop-down menu. 1640797011_409_Windows-10-Update-Error-0x800703f1-FIX
  5. Turn off the Real-time protection function by finding it and turning it off. 1640797011_381_Windows-10-Update-Error-0x800703f1-FIX

After that, try doing the upgrade once again.

Remember that turning off real-time protection leaves your machine exposed, so avoid visiting any questionable websites while it’s turned off.

Run the Windows Update Troubleshooter as a last resort.

If you can’t upgrade your system because of the 0x800703f1 error, it’s possible that the problem is with your system. Fortunately, Windows 10 has a number of troubleshooters that can quickly and easily resolve common PC issues.

There’s even a specific Windows Update troubleshooter you may use, but you’ll need to perform the following to launch it:

  1. Navigate to the Update & Security section of the Settings app.
  2. Select Troubleshoot from the left-hand menu. Select Windows Update in the right pane and click the Run the troubleshoot option. 1640797012_114_Windows-10-Update-Error-0x800703f1-FIX
  3. To finish the troubleshooter, follow the directions on the screen.

Check whether the issue persists after the troubleshooter has completed.

Solution 7 – Restart all components of Windows Update.

According to users, Windows Update components might occasionally create this issue. To resolve the problem, you must manually restart all Windows Update components.

You just need to perform a few commands in Command Prompt to do this. Simply follow these instructions to do so:

  1. As an administrator, open Command Prompt.
  2. Run the following commands in Command Prompt once it has started:
    • wuauserv wuauserv wuauserv wuauserv
    • cryptSvc should be stopped on the network.
    • halt bits on the internet
    • net msiserver halt
    • C:WindowsSoftwareDistribution ren C:WindowsSoftwareDistribution ren C:WindowsSoftwareDistribu SoftwareDistribution.old
    • Catroot2.old C:WindowsSystem32catroot2
    • wuauserv wuauserv wuauserv wuauserv
    • start
    • start bits on the internet
    • start msiserver with net

Try running Windows Update again after performing these instructions to see if the issue persists.

Solution 8: Reinstall Windows 10 from scratch.

Finally, if the issue persists, you should do a fresh Windows 10 installation. Installed applications and apps will be lost, but everything else may be backed up on other partitions.

So, reinstall your system using a USB/DVD device that has previously been made. We can assure you that everything will run lot more smoothly.

That should be the end of it. If you have any more questions or suggestions, please leave them in the comments section.

Check out our Windows Update site for more solutions and information on Windows Update.

1635156952_270_How-to-stop-Amazon-Assistant-from-popping-up-Fixed Are you still experiencing problems? Use this tool to fix them:

  1. Download this PC Repair Tool (download starts on this page).
  2. To detect Windows faults that may be causing PC difficulties, click Start Scan.
  3. To repair faults with Patented Technologies, click Repair All (Exclusive Discount for our readers).

This month, 0 readers have downloaded Restoro.

Was this page of assistance to you? 1

Thank you very much!

There are insufficient details It’s difficult to comprehend Other Speak with a Professional

Start a discussion.

Watch This Video-

The “Windows 10 Update Error 0x800703f1” is a common error that many Windows users have experienced. The fix for the issue is to run the system in safe mode and then update again. Reference: 0x800703f1 server 2019.

Frequently Asked Questions

How do I fix Windows 10 update failed?

A: If you have updated to Windows 10 and it has failed or is not working, try the following steps-
1. Boot into safe mode – Shut down your computer and wait 5 seconds after turning off before plugging in power again.2. Open Command Prompt3. Type stop wuauserv4. Type wuauclt refresh, this will initiate a refresh of your cached updates5. Restart PC6. Let Windows install all the updates7.: Make sure you are connected to WiFi otherwise downloads might take long

How do I fix a corrupted Windows Update?

A: If you believe that your computer has been hacked, contact Microsoft and file a report.

Related Tags

  • windows update troubleshooter
  • nvidia display 27.21 14.5671 error 0x800703f1
  • the configuration registry database is corrupted
  • 0x800703f1 2021
  • 0x800703f1 reddit

Leave a Comment

Your email address will not be published.