Replacing Speaker Grill Cloth (Step By Step)

Speaker grill cloths are the unsung heroes of your audio system. They allow you to hear every detail in movies, recordings and live concerts without any external interference. In this tutorial we’ll show you how quickly and easily replace the speaker grills on a pair of speakers with fresh ones that don’t have holes punched in them already.

If you have a speaker grill that is torn or broken, this article will help you replace the speaker grill cloth.

Replacing-Speaker-Grill-Cloth-Step-By-Step

We earn money from qualifying purchases made on our website as an Amazon Associate.

Speaker clothing are an important aspect of your speaker’s appearance. They also protect the speaker from dust and other particles as well as instruments that may enter the speaker. However, they get damaged over time due to wear and use, leaving you with the task of replacing them.

This article offers a detailed tutorial with step-by-step instructions for replacing your speaker clothing. Please note that we have a tutorial on how to clean speaker grill cloth if you just want to replace your speaker grill fabric since it is filthy. 

Needed Materials

It is not always necessary to replace your speaker material due to a rip in the material; sometimes it is only necessary to alter the appearance due to fading.

However, while replacing the speaker fabric, additional attention should be paid to material selection for a variety of reasons, including:

  • The material’s impact on the speaker’s sound flow; and
  • The material’s weight on the frame.

This is because if the material is too thick or does not have enough holes, the sound generated by the speaker may not be audible. A thick speaker cover material may also put too much strain on the speaker.

As a result, to make the best choice for your speaker cover, keep the following in mind:

Weave that is open

Because it enables sound to move readily through the fabric, open weave and mesh materials may be the ideal selection for your speaker covering.

Dustproof

One of the most significant duties of the speaker cover is to keep dust out of the speaker. Check to see whether the material will effectively shield the speaker from dust. This is why many people use acoustic fabric to keep dust at bay.

Aesthetics/Beauty

You could wish to include the attractiveness of the material to your list of needs, as much as sound delivery is important.

Step-by-Step Procedure for Replacing Speaker Cloth

One thing to keep in mind is that speaker clothing are not woven into the frame; instead, they are merely connected to the outside frame. As a result, removing and replacing clothing should be simple.

However, if the required procedures are not done correctly, the speaker’s frame may be damaged. The following is a step-by-step guide on how to correctly install your new clothing on your speaker:

  1. A pair of pins in the four corners of most speakers connect the frame to the speaker. By carefully unhooking the speaker from the frame with a screwdriver, you may separate it from the frame. Unhook the frame from the four pins to fully separate the speaker from the frame.

Replacing-Speaker-Grill-Cloth-Step-By-Step

1639762449_625_Replacing-Speaker-Grill-Cloth-Step-By-Step

2. Gently remove the fabric from the frame after taking it from the speaker without hurting it. You’ll note, like with most speakers, that the clothing is softly curved at the edge, as is the frame. Unhook the fabric from the frame by straightening the curved edges. Some garments are attached to the frame, which may need additional effort to remove.

3. Cleaning the frame surfaces thoroughly before applying the new fabric is the first step in preparing it for the new fabric. Aside from that, place your new cloth right side down on a clean, flat surface.

4. Glue is required to ensure that the fabric remains in place on the frame and that it is evenly distributed. Cover the back of the frame with cement. Spread the adhesive about an inch from the frame’s edge. 

1639762451_202_Replacing-Speaker-Grill-Cloth-Step-By-Step

5. Place the front side of the frame on the speaker fabric with the glue-covered surface facing up. The fabric’s corners should be drawn on the gum with extra effort using a staple gun at each of the corners. Stretch the clothing before stapling it to make it tight to guarantee that it stays exactly on the frame.

6. Pull each fabric edge into the frame’s corner, making sure all four sides are securely fastened. After uniformly distributing the cloth on all four corners, let it aside for a few minutes or an hour to dry completely.

1639762452_704_Replacing-Speaker-Grill-Cloth-Step-By-Step

7. To give it a nice finish, cut off any section that seems to be in excess using scissors or a knife. Finish by inserting the removed frame into the corner pins that were previously disengaged.

1639762453_935_Replacing-Speaker-Grill-Cloth-Step-By-Step

Can Any Cloth Be Used For Speakers?

Yes! When it comes to sound quality, however, the answer is a resounding no! Sounds from the speaker will travel quicker through a light material than through a thicker one. The bulk of the time, the attention is on how the material choice will affect the sound quality of the speaker.

Clothing that is thick and poorly woven may not be the ideal option for your speaker, while too light material may wear out too quickly.

Is it True That Removing Speaker Covers Affects Sound Quality?

It’s possible that answering yes or no in the positive is deceptive. This is because the speaker’s qualities and maker will be the deciding element in the outcome.

The difficulty is that some speaker manufacturers include the speaker cover in their design plan to see what happens when it is removed.

Even when there is a variation in sound output, it is practically undetectable most of the time. Speaker covers, on the other hand, are solely used to protect the speaker from dust.

Although, in some circumstances, removing the speaker cover causes a reduction in bass, this is due to a phenomenon known as diffraction.

Diffraction is a fancy phrase for how sound behaves when it collides with a surface. The manufacturer’s user handbook for the speaker will tell you whether or not the speaker cover affects it.

Conclusion

Finally, if at all feasible, speaker clothing should be replaced on a regular basis due to damage and wear. Choosing the right material for your speaker might be challenging if you don’t know what sort of fabric to use or what impact it will have on the speaker’s sound output.

This article provides detailed instructions on how to install your new speaker cloth, as well as the factors to consider while shopping for one. Changing the speaker clothe is simple if you follow the instructions outlined above.

Watch This Video-

Replacing your speaker grill cloth is a simple task that can be done in just a few minutes. This step-by step guide will show you how to do it. Reference: how to apply speaker grill cloth.

Frequently Asked Questions

How do I change the grill cloth?

A: If you want to change the grill cloth, it is recommended that you use a hairdryer for about 10 seconds. You can also use an iron if there are no games nearby, but this might cause damage to your game.

How do you replace a speaker cover?

A: The simplest way is to make your own. You can cut out a speaker cover from felt or cardboard and then use duct tape on the inside of it to hold in place.

How do you install speaker grills?

A: You first need to remove the grille from your speaker. After you do this, use a screwdriver or an electric drill with a small bit to widen out the holes on either side of the grill that have been removed and then put these pieces back in their new location on both sides of your speaker.

Related Tags

  • speaker grill cloth repair
  • speaker grill fabric
  • vintage speaker grill cloth
  • speaker grill frame kit
  • diy speaker grill cloth

Leave a Comment

Your email address will not be published. Required fields are marked *