How To Reset Hikvision IP Camera

A Hikvision IP Camera is an essential tool for any security professional. This camera has a lot of features that make it easy to automate and manage your security system. The only major drawback with this device is the fact that there’s no user-friendly way to reset its settings if it gets “stuck in a loop” or otherwise damaged beyond repair – until now!

The “how to reset hikvision ip camera without reset button” is a question that has been asked many times before. The answer is, there is no way to do this without actually physically pressing the reset button on the device.

If your Hikvision IP camera is having problems or the live feed is skewed, a simple reset may be all that is required. Naturally, this raises the issue of how to reset a Hikvision IP camera. There are a few different methods to do this, but keep in mind that your camera will revert to factory settings regardless of how you reset it. As a result, you’ll have to re-create any custom setups to get them back to their original condition.

Why Is It Necessary To Reset A Hikvision IP Camera?

It may seem unneeded due to the problem of how a hard reset restores your settings to factory defaults. There are situations, though, when a hard reset is the only choice available. If you have forgotten your password, you will most likely need to reset the camera. You can’t use the camera unless you know your password, and you’ll have to reset it if you want to keep using it.

The camera may also freeze or become unusable, therefore it’s a good idea to reset it. During usage, several mistakes may occur. In some cases, a simple reset will solve the problem. This isn’t often, but it may happen with older camera models. If your camera’s troubles remain after a reset, it may be time to replace it.

Different Methods To Reset Hikvision IP Cameras

A Hikvision IP Camera may be reset in a variety of ways. We’ll go through each one individually below:

Button to Reset

The simplest and most straightforward method is to press and hold the reset button. The reset button is usually present on most models, and you should consult the instruction manual to find it. They are commonly push-down buttons or memory card slots at the bottom of the device. Follow the instructions below to reset the camera using this method:

  • On your model, look for the reset button.
  • Disconnect the camera’s power source.
  • Hold the reset button down until the camera turns off or the screen goes dark.
  • After that, reconnect the camera’s power supply.
  • As you create the connection, keep holding down the reset button.
  • Let go of the button. If the camera does not start up on its own, you may manually switch it on.

Some models may boot you to the setup page at this point, where you can establish your password and restore to prior settings. Some versions may need a password. If you are requested for a password, the default password for IP cameras is generally 12345. If you are prompted for a password, try that.

Taking a Break From The Computer

Because certain models lack a reset button, the first procedure is ineffective. The second alternative is to use a web browser to reset it, but this will need you to know the password. As a result, this procedure is primarily utilized to remedy camera flaws or mistakes.

Follow the steps below to do this:

  • In the URL bar of your preferred web browser, input the IP address of your camera (the default IP starts with
  • On the left, there should be a menu where you can find the maintenance tab.
  • Switch to the configuration bar at the top after clicking the maintenance tab.
  • You should see an option to restore the default settings if you scroll down.
  • When you choose that option, you will be presented with a final prompt.
  • If you choose yes, the camera will revert to factory settings.
  • Use the password to get access to the camera.

You may be offered the opportunity to upgrade the firmware on your camera after resetting it. This is critical since updated firmware resolves a variety of difficulties. It also safeguards against cyber-attacks.

Using the Hik Connect App to Reset

The last alternative is to get the Hik Connect App on your smartphone. You may force a reset via the app after installing it and connecting it to the appropriate Hikvision IP camera. As long as the app supports the model, this is the simplest method to reset your camera.



We hope that we were able to demonstrate how to reset a Hikvision IP Camera. To summarize, there are three methods to reset, the simplest of which is to use the Hik Connect app on your smartphone. However, if it isn’t compatible, you’ll have to use one of the other options.


The “how to reset hikvision ip camera ds-2cd1023g0e” is a problem that has been present for a while. The solution is simple. All you have to do is use the reset button on your camera.

Frequently Asked Questions

How do I factory reset my Hikvision IP camera?

A: To factory reset your Hikvision IP camera, hold the power button on the side of it for about 20 seconds. This will automatically revert back to its default settings and you can then reconnect to it via your computer or other device that is connected to the internet.

How can I reset my Hikvision IP camera password?

A: Before you reset the password, make sure to connect and disconnect your Hikvision IP camera from its power source for at least 5 seconds. If it still doesnt work after that then unfortunately this wont be able to help you with your issue!

How do I reset my IP camera to factory settings?

A: To reset your IP camera to factory settings, first open it up and locate the reset button on the back. Next, press and hold this for five seconds until you hear a quick beep or see flashing lights on the left side of your device.

Related Tags

  • hikvision ip camera reset software
  • how to reset hikvision ip camera using sadp tool
  • how to reset hikvision ip camera password
  • hikvision ip camera default password
  • how to reset hilook ip camera

Leave a Comment

Your email address will not be published. Required fields are marked *